5.5KW Double Layer Roll Forming Machine , Trapezoidal Sheet Roll Forming Machine

840 - C21 Double Rib Ecotrim Galvanized Steel Profile Metal Roof Press Machine

1, Main Component of the production line:

1). Decoiler---------------------------------------------1unit

2). Feeding guide-------------------------------------1unit

3). Main roll forming system------------------------1 unit

4). Hydraulic station-----------------------------------1 unit

5). Hydraulic cutting service-------------------------1 unit

6). PLC computer control-----------------------------1 unit

7). Safety cover------------------------------------------2 unit

2, Parameters of 840 - C21 Double Rib Ecotrim Galvanized Steel Profile Metal Roof Press Machine:

1), Step of forming roller : 16steps/ 18 Steps

2), Diameter of shaft(solid shaft): 75mm

3), Material of shaft (solid shaft): (high grade) 45# Steel, quenched and tempered treatment,hard chromize coated 0.05-0.07mm.

4), Chain : 25.4 mm (high grade)

5), Bearing : 6210 (high grade)

6), Reducer : 5# cycloid reducer (high grade)

7), Power of main motor : 5.5KW

8), Voltage: 380V/50Hz/3phase

9), Line speed : about 15m/min

3, Hydraulic Un-coiler

Un-power: manual de-coiler; Max. Capacity: 5T

Suit for coil inner diameter: 508mm, suitable coil Max. out diameter: 1000mm

Manual power expands the coil inner surface.

4, Hydraulic Cutting

1) Adopts post cutting, Stop to cut

2) The cutting blade material is Cr12 with quenched treatment.

3) Adopts welded frame for good rigidity.

4) Cutting frame has been heat treatment to avoid final product deformation. cutting length tolerance ±2mm.

5) The power of cutting is provided by hydraulic station.

5, After-sales service:

We provide the technical support for whole life of our machines.If you need, we could arrange our technical staff to go abroad.

6, Product show:

double deck roll forming machine

cold roll forming machine

5.5KW Double Layer Roll Forming Machine , Trapezoidal Sheet Roll Forming Machine Images